Monthly Archive for June, 2010

Clogged Drain or Tree Root Damage? Time for Vaporooter

Published on June 14, 2010 in Clogged Drain, General, Pipe Damage and Root Infiltration. 2 Comments Tags: , , , , , , , .

Vaporooter is the perfect solution to remove tree roots in sewer pipes. When used in repeated applications to remove tree roots from sewer lines, Vaporooter approaches the level of 100 percent effective in tree root control. No process to remove tree roots in pipes and away from foundations has proven to be nearly as effective or efficient.

Vaporooter is delivered in a foam application to prevent tree roots damage. The foam ensures that the combination of herbicides, Metham Sodium (herbicide), and Dichlobenil (growth inhibiting agent) reaches every root surface within the pipes to kill the root and prevent regrowth of the root cells. This effectively addresses the tree root problem within the pipe and eliminates roots in drains.

The use of a foam application also controls the amount of time the herbicide combination is in contact with a tree root. Vaporooter only affects the tree root problem in pipes and does not affect trees or shrubs that are above the ground as it is not absorbed by the tree. No method to remove roots in pipes has proven to deliver the same safe and effective process as Vaporooter.

As a chemical compound, Vaporooter must be applied by a Mini Foamer machine by a licensed applicator. By following this process to address a clogged drain, it helps to ensure the Vaporooter foam safely and truly penetrates the root to remove the roots in sewer pipes.

The machine generates the foam and pumps it to remove tree roots. The technician is trained to ensure this process delivers foam completely throughout the pipe to penetrate roots in drains and prevent their growth. The herbicides in the Vaporooter will penetrate the roots in drains and burst the root, causing it to die and decay. Grease and slime are stripped away from the clogged drain to allow for deep penetration to prevent the tree root problem.

Removing tree roots from a clogged drain must first be done with an auger to clean out the root mass and make way for the proper method to treat roots in drains. Vaporooter should be applied within 6 to 8 weeks of new implementations or fresh root cuts to prevent continued tree root damage. When this process to remove tree roots from pipes is done annually, it can effectively prevent future tree root damage.

No one should have to be at the mercy of an invasive tree root problem on their property. Removing tree roots in sewer pipes and away from foundation walls can easily be achieved with Vaporooter. We can show you how to remove roots in pipes with our licensed applicator and proven Vaporooter method. You no longer have to pay for tree root damage.

Don’t wait for your tree roots to become a problem that costs significant resources to repair. Call a Vaporooter profeassional today to assess your tree root problem and eliminate your clogged drain. They can show you how to remove roots in pipes before they cause a clog and backup your system. Sewer root control is proven and effective with Vaporooter!

Share

Need to Safely Remove Roots in Pipes? Turn to Vaporooter

Published on June 7, 2010 in General, Pipe Damage, Root Infiltration and Tree Roots. 1 Comment Tags: , , , , , .

Vaporooter has been the premier solution to remove tree roots found in pipes for more than 40 years. As tree root problem growth threatens building foundations and the basic infrastructure of cities and towns, municipalities needed a way to mediate tree root damage. Roots in sewer pipes and penetrating foundations can cause challenging and expensive problems without Vaporooter to provide the ultimate in sewer root control.

This go-to solution delivers a proven product for any tree root problem as it keeps the infrastructure of cities and towns up and running. When tree roots in sewer pipes impede the free flow of liquids, the backup and associated damage demands an optimal solution for roots in drains.

In 1967, the County of Sacramento, California sought a solution to the growing tree root problem. Sewer lines were increasingly damaged and clogged drains were backing up into buildings. The current process to remove tree roots from pipes could not keep up with the rapid movement of root growth. Cutting methods to remove tree roots were also time-consuming and labor intensive.

Botanist Oliver Leonard at the University of California-Davis (UC-Davis) was enlisted by Sacramento city and county officials to determine why cutting roots to eliminate tree root damage were falling short of eliminating the problem. To get a better understanding of the science behind tree roots in sewer lines, Leonard and his UC-Davis team excavated infected areas.

By closely examining sections of infected tree roots, researchers could document and analyse the root growth patterns. It was determined that cutting to remove roots in pipes ensures the roots are exposed to nutrition, causing them to grow back bigger and faster, thereby exacerbating the problem.

With continued testing on methods to remove tree roots in pipes, researchers discovered the virtue of metam sodium. This unique chemical has been proven to be very efficient in the process of removing roots in pipes as it treats the growth of the root, without hurting the plant itself. In addition to effectively preventing tree root damage, this compound dissipates quickly without leaving behind any harmful residue.

Researchers had discovered how to remove tree roots from pipes safely and effectively, yet they still wanted a way to prevent the root from growing back into the lines. The answer came with the addition of dichlobenil, discovered by Fred Horne in 1968. This growth inhibitor helps to ensure a tree root problem in pipes would not return once treated with the chemical application.

The removal of roots in sewer pipes became easy when the herbicide metam sodium was added to the growth inhibitor dichlobenil as roots in drains could be covered with a foam application. The resulting surfactant formulation created dense foam that could thoroughly cover the tree root and pipe surfaces.

The discovery of the effectiveness of this foam in the process to remove tree roots from sewer pipes and keep them root free for years, Vaporooter was born. The patented Vaporooter today demonstrates how to remove roots in pipes and ensuring the free flow of waste fluids through the pipe line.

Share