Monthly Archive for May, 2010

Tree Root Damage Prevented With Vaporooter

No one wants to have to deal with tree roots in sewer pipes and in the process of trying to address the problem when it occurs, tree root damage can be a common problem. To achieve effective removal of roots in drains and address a tree root problem, nothing has been proven to be nearly as effective as Vaporooter.

Vaporooter foam is designed to remove roots in pipes without causing damage to the environment or surrounding plant life. The chemical combination in Vaporooter is protected and monitored by the EPA and must be applied by a trained and certified Vaporooter technician. When properly applied on an annual basis, you can safely and effectively remove tree roots from a clogged drain.

Vaporooter delivers other advantages as well, including continuous protection. The application only needs to take place once a year to address an ongoing tree root problem. This method to remove tree roots from sewer lines is an effective way to prevent roots from penetrating pipes in the future while also preventing tree root damage.

Vaporooter is also cost effective. For less than $1.50 per day, you can prevent roots in drains from growing back after they have been removed. This process for addressing a clogged drain ensures you can remove roots in pipes without tearing out landscaping or the pipe itself. No digging is required and your tree root problem can become a thing of the past.

The process for using Vaporooter and the chemicals it delivers to remove tree roots from sewer lines while preventing tree root damage to other pipes and foundations has been proven to be 100 percent safe and effective. While it is important that the Vaporooter be handled only by a trained and certified technician, its application will not cause harm.

When compared with costly repairs to pipelines, foundations and landscaped areas, the application of Vaporooter is significantly less expansive to remove roots in pipes. A clogged drain can seem like a simple blocked pipe, but in reality, tree root damage can cost a fortune. When Vaporooter is properly used on an annual basis to treat roots in sewer lines, homeowners and municipalities avoid costly repairs.

The proven method in the use of Vaporooter to remove roots in pipes and prevent tree root damage is readily available throughout the world. Municipalities in the United States, Canada, Australia and New Zealand have relied on Vaporooter to remove tree roots from sewer pipes and prevent untold damage to sewer lines and building foundations. No other method to remove roots in pipes has been proven to be as effective, safe or efficient as Vaporooter.

Vaporooter should be applied to tree roots in sewer lines every year to ensure root regrowth does not occur. This process to remove tree roots in sewer lines is necessary as ongoing maintenance as once tree roots have found a nutrient source, they will continue to seek that source. You cannot control the habits of the tree, but you can prevent tree roots in sewer pipes with Vaporooter.

Share

Remove Tree Roots with Vaporooter

It is important to remove tree roots from sewer pipes in order to ensure the free flow of liquids throughout the system. Unfortunately, sewer pipes are a draw for tree roots as they will grow toward moisture through a continuous process that occurs at the end of the root.

Roots in sewer pipes are the result of roots growing one cell at a time at the end of the root. This process allows the root to penetrate extremely small openings in the pursuit of nourishment, leading to roots in drains. Once a tree root problem occurs, it can divide hundreds of times to form an enormous mass of tender root ends.

Vaporooter emerged onto the scene more than 40 years ago as municipalities needed to address clogged drain issues and to develop a process to remove tree roots. Vaporooter is a chemical compound protected by the EPA, therefore it must be applied by a Mini Foamer machine by a licensed applicator to ensure it safely and truly penetrates roots in sewer pipes.

The machine generates the foam and pumps it to deliver optimal sewer root control and remove roots in pipes. The applicator is trained to ensure this process to remove roots in pipes delivers foam completely throughout the clogged drain to ensure good contact with all tree roots. This helps to deliver safe and effective control of roots in sewer pipes without tree root damage.

Vaporooter should be used within six to eight weeks of installing the sewer system for new implementations to avoid a clogged drain later.  If you want to avoid roots in sewer pipes later, learn how to remove tree roots with Vaporooter. If this process is done annually, it can prevent the cracking damage caused by live tree roots in sewer lines.

When the herbicides present in the Vaporooter penetrate the tree roots in drains, it bursts the root, causing it to die and decay. The herbicide combination enables grease and slime to be stripped away from tree roots in sewer pipes to allow for deep penetration in the root mass to inhibit root cell division and growth for up to three years.

The Vaporooter is truly the most effective method to remove tree roots from sewer pipes. To avoid tree root demand, you must first remove the roots from a clogged drain with an auger to clean out the root mass. Sewer root control is inhibited if Vaporooter is immediately applied unless your Vaporooter applicator can overcome the obstacle of “bleeding sap”.

When a tree root is cut during the initial treatment to remove roots in pipes, the tree roots respond very quickly by “bleeding” a sap that assists healing and regrowth. Think of it as the tree’s survival method. The bleeding sap can block the absorption of the Vaporooter foam for a number of days. If application is done six to eight weeks after the roots are cut, the Vaporooter foam is efficiently maximized in the application.

Vaporooter should be applied to tree roots in sewer lines every year to to address your tree root problem. This process to remove tree roots in sewer lines is necessary as ongoing maintenance as once tree roots have found a nutrient source, they will continue to seek that source. You cannot control the habits of the tree, but you can prevent tree roots in pipes with Vaporooter.

Share

Remove Roots in Pipes with Vaporooter

As much as trees contribute to the value of property, the health of citizens and the basic aesthetics of the environment, their roots can be extremely intrusive. When this intrusion happens in sewer lines, the tree roots in sewer pipes cause extensive damage. Implementing a process to remove tree roots from a clogged drain is essential in order to ensure the free flow of the waste water collection system.

A tree root problem can result from continuing growth. A root will grow toward moisture through a continuous process. Tree root damage caused by roots in drains is the result of roots that grow one cell at a time, enabling the root to penetrate extremely small openings in the pursuit of nourishment.

Once the root has entered a pipe, tree root damage escalates. A clogged drain caused by roots in sewer pipes is a much more formidable adversary than a basic clog. Once tree root damage occurs and the pipe is penetrated, the root can divide hundreds of times to form an enormous mass of tender root ends.

It is important to remove roots in pipes before a devastating backup can occur. The mass of roots within a clogged drain usually collects a thick coating of grease, causing it to become heavy and hang in the water. This hanging creates grit settlement and shoaling. As debris and sewage solids continue to build in the clogged drain, it piles on the root mass until a blockage occurs.

A common solution is to use an auger on the roots in sewer pipes to remove tree roots from the sewer lines. This process to address a tree root problem can actually allow the tree roots to grow back bigger and stronger before, thereby exacerbating the tree root problem. A better solution that is not only easier to apply, but also ensures roots in drains cannot continue to be a problem is the Vaporooter solution.

Vaporooter is the perfect solution to remove tree roots from sewer lines as it is safe to use and does not hurt trees or other plants above ground. The use of Vaporooter approaches the level of 100 percent effective in the process to remove roots in pipes. In fact, when used in annual applications, Vaporooter has proven to be the safest and most effective process to remove tree roots from sewer lines.

Delivered in a foam application by a certified technician, Vaporooter ensures that your tree root problem is no longer a problem. The foam ensures that the combination of herbicides, Metham Sodium (herbicide), and Dichlobenil (growth inhibiting agent),   reaches every root to address an ongoing tree root problem. The roots in sewer pipes will no longer grow in the pipes to ensure pipes that allow for the free and clear flow of fluids.

The use of a foam application also controls the amount of time the herbicide combination is in contact with a tree root to remove roots in pipes. No method that approaches how to remove tree roots has failed to deliver the same safe and effective process as Vaporooter.

Share

Sanafoam Vaporooter II versus traditional methods of dealing with root infiltration

Tree root infiltration in the sewage pipes can lead to the blockage of and overflow in the draining system, the destruction of the system itself and even the replacing and relining of the pipes. The traditional methods of dealing with this problem involve short-term fixing, not long-term solutions and prevention.

The most widespread traditional method of dealing with a live root invasion problem is the cutting of the root. Although this may seem like a good immediate response, the long term result is disastrous. The cutting leads to rejuvenation and strengthening of the root, which becomes an even more forceful enemy of the pipes. Plus, some types of roots, like the ones that grow along the length of the pipe, are very difficult to cut due to their shape and position.

The modern efficient alternative is the Sanafoam Vaporooter, a combination of herbicides that leads to the weakening and later killing of the unwanted roots. The effect of the herbicides can be as long as three years, if proper retreatment is applied. Unlike the cutting of the root, which offers immediate response, the clearing of the pipes with the Vaporooter can take up to six months, as the natural decay of the killed roots cannot happen overnight. If the treatment is reapplied after six months, the efficacy percentage can be as high as 99.

While the cutting of the roots solves the blockage problem, it does not prolong the life the pipes. Vaporooter can destroy even the small root cells which have used small cracks to get inside the pipe. By removing these elements, the pipe cracks can close up under the ground weight.

Because cutting the tree only momentarily solves the problem and does not prevent further problems from forming, root invasions are dealt with only when they become an emergency. Urgent interventions, which may even involve the replacing of the pipes, are very costly and time-consuming. Vaporooter, however, is much more efficient cost and time-wise, because it solves and prevents root invasion problems, controlling them at all times and not letting them get out of hand.

Vaporooter is environment-friendly, as it only affects the roots inside the pipe, in the pipe wall and very close to the pipe. As it is biodegradable and non-acidic, it does not bother the trees and plants above the pipe. Cutting the roots, however, as they lead to even stronger roots, may create severe blockages which require pipe replacing, a possibly invasive method for the surrounding vegetation.

Share

The scientific research history of Vaporooter

The infiltration of the tree roots in the sewage pipes has been a very destructive, time and money consuming issue for many decades. Traditional methods of clearing the pipes, including root cutting, usually led to costly emergency interventions that sometimes even included replacing or relining the pipes. As the blockages and overflows of the drain pipes recur regularly and the tree cutting solution is effective only in the short run and destructive in the long run, more efficient methods and technologies were needed.

The research in this direction started in 1966, when herbicide treatment was first taken into consideration as a solution for tree root infiltration. The research led at The University of California directed trials with 17 herbicides between 1967 and 1971.

The most effective combination of herbicides, which is currently used in Sanafoam Vaporooter II, was discovered in 1971, and consists of Metham Sodium and Dichlobenil. Although this mixture did soften and kill the invasive tree roots, the method of application was faulty. Initially, plugging the line was the way to introduce the herbicide mix into the problem area – an invasive and inefficient method.

The currently used method was only discovered in 1972 by Fred Horne, who suggested the foaming method, which allows maximum exposure of the root to the herbicide, thus maximum efficacy. Although the method is most aggressive with the invasive roots, it does not affect the surrounding or above-situated plants and roots. Actually, the method and ingredient recipe make a great match, which does not have negative side effects or secondary victims. The biodegradable and non-acid features of the Vaporooter make it environment-friendly.

Plus, the Vaporooter method does leave room for natural processes. After killing the roots, it allows these to naturally decay throughout a period of six months. Due to the natural decay, the clearing of the pipes is not immediate and a retreatment is recommended. Treating and retreating your pipes with the foam gives a long-term solution to a difficult problem. Vaporooter solves the tree root invasion problem, prevents future infiltrations, blockages and overflows and prolongs the life of the drain pipes.

Share